Clas Ohlson WS2068HL+WT450H Manual page 9

Switch between different settings and setup modes by pressing [Mode].
1. Setting the time
1. Press and hold [Mode] (4) for 3 seconds.
2. Press [Max/Min+] to set the hours
3. Press [Select °C / °F/-] to confirm the
setting and enter the minutes setting.
4. Press [Max/Min+] to set the minutes
5. Press [Select °C / °F/-] to confirm the
setting and enter the date setting.
6. Press [Max/Min+] to set the date.
7. Press [Select °C / °F/-] to confirm the
setting and enter the month setting.
8. Press [Max/Min+] to set the month.
9. Press [Select °C / °F/-] to confirm the
setting and enter the year setting.
10. Press [Max/Min+] to set the year.
11. Press [Select °C / °F/-] to confirm the
setting and enter the minutes setting.
12. Press [Max/Min+] to set the Longitude (go
past "0" to change from East "E" to West
"W"). Press [Select °C / °F/-] to confirm the
setting and enter the Latitude setting.
13. Press [Max/Min+] to set the Latitude. Press [Mode] to exit the settings mode.
• Press [Snooze] to change from 12 to 24 hour display (for Clock 2).
• Press [Alarm / Channel] to reset the seconds.
• The day will automatically be displayed when the Month/Year/Date settings
have been entered.
• February has 28 or 29 days depending on the year.
2
2 4 6 8 10 12
1 13
!
*
3 5 7 9 11

#
7
3
5
!