Join An Active Meeting - Grandstream Networks GVC320x User Manual

JOIN AN ACTIVE MEETING

Assuming there is already an active IPVideoTalk meeting hosted by other GVC320x, you can join this
meeting from your GVC320x by dialing the host GVC320x's IPVideoTalk ID, or dialing the meeting ID directly.
Here are the steps:
1. Contact the active meeting's host to obtain the host GVC320x's IPVideoTalk ID, or the meeting ID.
2. On your GVC320x LCD, click on to bring up the dial screen.
3. Enter the IPVideoTalk ID or meeting ID in the dial-up box, then dial out.
4. If the meeting is locked or password-protected, you will see video screen like below. Contact the host
to get the password.
How to use GVC320x in IPVideoTalk Meeting Page 8 of 20