Table of Contents
Advertisement
HOW TO MOUNT TO A BICYCLE
(1/3)
PRECAUTIONS WHEN MOUNTING
• Be sure to tighten the dial by hand. When you tighten it too hard with a
tool, the screw thread may be stripped.
• Round off the cut edge of the bracket strap to prevent injury.
• Ensure that the frame is clean, and then pull the fixing strap tightly to fix
the control unit in place. If the control unit is not securely fixed in place,
the battery unit may shift or come off due to impacts during riding.
• When some cables are installed along the top tube, attach the cable cover in ad-
vance to protect the cable from any force applied. Otherwise, it may cause trouble
in braking or gear shifting.
• Pay attention to the arrangement of the cable so that it does not interfere
with the handling of the bicycle.
Do not secure the cable at an acute angle because the wire inside the
cable may break.
• Do not use a damaged rubber band.
Light unit
Remote control switch
(Page. 11)
Bracket
Dial
Rubber band
Fixing strap
Cable cover
Control unit
Battery unit
Auxiliary strap
5
Advertisement
Table of Contents
