Table of Contents
Advertisement
PRECAUTIONS ON USE
Handling the remote control switch
• The remote control switch and the light have ID-based pairing function in order to elimi-
nate interference with other devices.
Although the IDs have been paired at the factory, check that the remote control switch
turns on/off the light before use.
When you replace the remote control switch due to damage or loss, follow the instruc-
tions in the operation manual to pair the switch with the light.
• While the light is in use, do not keep the remote control switch in a pocket, bag, or simi-
lar location while traveling.
It may cause the switch to be operated by mistake, causing the light to turn off.
• Pressing and holding the remote control switch will significantly reduce battery life.
Storing the light unit
• Remove the battery unit from the control unit to prevent unintentional illumination of the
light during storage.
Using the light
• In Dynamic mode, the headlight can be turned on continuously, but continuous illumina-
tion in high temperatures may cause the protection function to activate earlier, causing
the lighting mode to be decreased by a level.
• Make sure that the lens is clean before use. Using the light with foreign material such as
mud on the lens may cause the lens to melt.
This ultra high intensity light can generate a significant amount of heat during operation and
there is a risk of fire or burns. Using the light under the following conditions is dangerous.
• Do not place hands or any other objects in front of the lens while the light is in use.
• Do not use the light with the lens facing downward on any table, wooden, or otherwise
potentially flammable surface.
Please follow these precautions when handling the light.
3
Advertisement
Table of Contents
