Samsung ML-551 Series User Manual page 45

1. Squeeze and slide the paper width guide and paper length lever to
locate them in the correct paper size slot marked at the bottom of the
tray to adjust to the paper size.
• To adjust the tray to fit paper smaller than A5, slide the tray
length guide inward to A5 marked at the bottom of the tray.
Then the handle in the middle of the paper length guide will be
separated. Squeeze and slide the separated handle inward to
the paper size you want.
• The duplex unit (optional for some models) is preset to Letter
or A4 size, depending on your country. To change the paper
size, adjust the guide as shown below.
• Do not push the paper width guide too far causing the media to
warp.
• If you do not adjust the paper width guide, it may cause paper
jams.
2. Flex or fan the edge of the paper stack to separate the pages before
loading papers.
3. Place paper with the side you want to print facing down.
Paper quantity indicator shows the amount of paper in the tray.
4. After inserting the paper into the tray, squeeze and slide the paper width
guide and paper length guide to adjust to the paper size.
Media and tray_ 45
1 2
1 Full
2 Empty