Network Setup 36 - Samsung ML-551 Series User Manual

network setup
3.
This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:
• Network environment
• Introducing useful network programs
• Using a wired network
Supported optional devices and features may differ according to your
model. Please check your model name (See "Features by Models" on
page 25).
NETWORK ENVIRONMENT
You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
machine's control panel.
The following table shows the network environments supported by the
machine:
ITEM
Network interface •
•
Network operating system •
•
•
•
•
Network protocols •
•
•
•
•
•
•
•
(See "IPv6 Configuration" on page 40.)
Wireless security •
(Optional)
•
SPECIFICATIONS
Ethernet 10/100/1000 Base-TX
802.11 b/g/n Wireless LAN (Optional)
Windows
2000/XP/2003/2008/Vista/7/2008
Server R2
Various Linux OS
Mac OS X 10.3 ~ 10.8
UNIX
Novell NetWare 5.x, 6.x (TCP/IP Only)
TCP/IPv4
802.1x
DHCP, BOOTP, AutoIP
DNS, WINS, Bonjour, SLP, UPnP
Standard TCP/IP Printing (RAW), LPR,
IPP, WSD
SNMPv 1/2/3, HTTP (S), Telnet, SMTP
(S), LDAP (S), IPSec
SMB, FTP, Kerberos
TCP/IPv6 (DHCP, DNS, RAW, LPR,
SNMPv 1/2/3, HTTP (S), IPSec)
Authentication: Open System, Shared
Key, WPA Personal, WPA2 Personal
(PSK)
Encryption: WEP64, WEP128, TKIP,
AES
• Installing network connected machine's driver
• IPv6 Configuration
INTRODUCING USEFUL NETWORK PROGRAMS
There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.
Before using the programs below, set the IP address first.
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to:
• Configure the network parameters necessary for the machine to connect
to various network environments.
• Customize machine settings.
(See "Using SyncThru™ Web Service" on page 68.)
SyncThru™ Web Admin Service
A web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of man-
aging network devices and lets you remotely monitor and troubleshoot net-
work machines from any site with corporate internet access. Download this
program from http://solution.samsungprinter.com.
SetIP
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol (See "IPv4 set-
ting using SetIP Program (Windows)" on page 37, "IPv4 setting using SetIP
Program (Mac)" on page 37 or "IPv4 setting using SetIP Program (Linux)"
on page 38).
TCP/IPv6 is not supported by this program.
USING A WIRED NETWORK
You must set up the network protocols on your machine to use it on your
network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding
port on your machine.
Printing configuration report
You can print a Configuration Report from the machine's control panel that
will show the current machine's network settings. This will help you to set up
a network and troubleshoot problems.
Network setup_ 36