Correcting Numbers Or Names - Samsung ML-551 Series User Manual

Each time you press 6, the display shows a different letter, M, N, O, m,
n, o and finally 6.
2. To enter additional letters, repeat step 1.
If the next letter is printed on the same button, move the cursor by press-
ing the left/right arrow button and then press the button labeled with the
letter you want. The cursor will move to the right and the next letter will
appear on the display.
You can enter a space by pressing 1 twice.
3. When you have finished entering letters, press OK.

Correcting numbers or names

If you make a mistake while entering a number or name, press the left/right
arrow button to delete the last digit or character.
USING THE POWER SAVING MODE
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Power Save and press OK.
4. Press the up/down arrow to select the time you want.
5. Press OK to save the selection.
6. Press Stop/Clear to return to the ready mode.
SETTING JOB TIME-OUT
When there is no input for a certain period of time, the machine cancels the
current job. You can set the amount of time the machine will wait before
canceling the job.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Job Timeout and press OK.
4. Enter the time using up/down arrow or numeric keypad.
5. Press OK to save the selection.
6. Press Stop/Clear to return to the ready mode.
AUTO CONTINUE
This is the option to set the machine to continue printing or not, in case the
paper size you have set and the paper in the tray mismatches.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Auto Continue and press OK.
4. Press the up/down arrow until the setting option you want appears.
• On: Automatically prints after set time passes, when the paper size
mismatches the tray paper size.
• Off: Waits until you press Start on the control panel, when the paper
size mismatches the tray paper size.
5. Press OK to save the selection.
6. Press Stop/Clear to return to ready mode.
CHANGING THE FONT SETTING
Your machine has preset the font for your region or country.
If you want to change the font or set the font for special condition, such as
the DOS environment, you can change the font setting as follows:
1. Double-click the Smart Panel icon on the Windows task bar (or Notifica-
tion Area in Linux). You can also click Smart Panel on the status bar in
Mac OS X.
2. Click Printer Setting.
3. Click Emulation.
4. Confirm if PCL is selected in Emulation Setting.
5. Click Apply.
Following information shows the proper font list for corresponding lan-
guages.
• Russian: CP866, ISO 8859/5 Latin Cyrillic
• Hebrew: Hebrew 15Q, Hebrew-8, Hebrew-7 (Israel only)
• Greek: ISO 8859/7 Latin Greek, PC-8 Latin/Greek
• Arabic & Farsi: HP Arabic-8, Windows Arabic, Code Page 864,
Farsi, ISO 8859/6 Latin Arabic
• OCR: OCR-A, OCR-B
Basic setup_ 43