Silvercrest SDR 1100 A2 Operating Instructions Manual page 47

Extension nozzle
GB
Assembling the squeegee
Upholstery nozzle
44
Push the extension nozzle
The marking line on the extension nozzle
appliance must be aligned with each other (see fold-out page Figure A).
Turn anticlockwise until both marking lines on the extension nozzle
aligned with both marking lines on the appliance. The extension nozzle
remains locked in this position (see fold-out page Figure B).
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
extension nozzle
10
■ The extension nozzle
Remove the upholstery nozzle
brackets onto the squeegee attachment
Then press the upholstery nozzle
attachment (see fold-out page).
13
Push the upholstery nozzle
The marking line on the upholstery nozzle
appliance must be aligned with each other (see fold-out page Figure A).
Turn anticlockwise until both marking lines on the upholstery nozzle
aligned with both marking lines on the appliance. The upholstery nozzle
remains locked in this position (see fold-out page Figure B).
■ A cotton cover is supplied for use with the upholstery nozzle
15
be used for the cleaning of sensitive surfaces, such as sofas and armchairs.
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
upholstery nozzle
14
■ The upholstery nozzle
on to the steam nozzle
10
10
.
is removed in the reverse order.
10
and place this together with the two
14
.
13
under the mount of the squeegee
14
on to the steam nozzle
14
14
.
is removed in the reverse order.
14
as far as the stop .
6
and the marking line on the
10
as far as the stop.
6
and the marking line on the
. This can
14
SDR 1100 A2
are
10
are
14
14