Auxiliary Light; Tail/Brake Light - Yamaha MT125 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit as shown,
and then install the bolt on each
side.
TIP
Check the wire routing when headlight
unit is installed in order to avoid wire
pinching and coupler disconnection.
6
ZAUM1224
7. Have a Yamaha dealer adjust the
headlight beam if necessary.

Auxiliary light

This model is equipped with LED-type
auxiliary lights.
If an auxiliary light does not come on,
have a Yamaha dealer check it.
6-34
EAU54501

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU24182