Yamaha MT125 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
the UK only). Push the "INFO" button
to switch between these display set-
tings.
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.
3
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
 "AVE_ _._ MPG" (for the UK only):
The average distance that can be
traveled on 1.0 Imp.gal of fuel is
shown.
To reset the average fuel consumption
display (mode "ODO" should be se-
lected), select it by pushing the "INFO"
button, and then push the "RESET"
button for two seconds.
TIP
After resetting the average fuel con-
sumption display, "_ _._" is shown until
the vehicle has traveled 1 km (0.6 mi).
Average speed display
Hi
Lo
ZAUM1156
The average speed display shows your
average traveling speed since it was
last reset. It can be set to either "AVE
SPEED_ _._ km/h", AVE SPEED __._
mph" (for the UK only, push the "INFO"
button to switch between these display
settings).
 "AVE SPEED_ _._ km/h": Your av-
erage traveling speed in kilome-
ters per hour.
 "AVE SPEED_ _._ mph" (for the
UK only): Your average traveling
speed in miles per hour.
To reset the average speed display
(mode "ODO" should be selected), se-
lect it by pushing the "INFO" button,
and then push the "RESET" button for
two seconds. The average speed dis-
3-9
play will also reset automatically 4
hours after the key was last turned to
"OFF".
Time tripmeter
Hi
Lo
ZAUM1157
The time tripmeter displays "_h _min"
(hours and minutes) the time that has
elapsed since the key was turned to
"ON" since the time tripmeter was last
reset.
To reset the time tripmeter display
(mode "ODO" should be selected), se-
lect it by pushing the "INFO" button,
and then push the "RESET" button for
two seconds. The time tripmeter will
automatically reset 4 hours after the
key was last turned to "OFF".