Rear Wheel (For Non-Abs Models) - Yamaha MT125 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Rear wheel (for non-ABS
models)
WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
To remove the rear wheel
WARNING
6
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the axle nut.
EAU44802
EWA14841
EAU56701
ZAUM1193
1. Axle nut
2. Drive chain slack adjusting bolt
3. Locknut
EWA10822
4. Brake caliper
2. Lift the rear wheel off the ground
according to the procedure on
page 6-36.
3. Remove the axle nut.
4. Fully loosen the locknut on each
side of the swingarm.
5. Turn the drive chain slack adjust-
ing bolts fully in direction (a) and
push the wheel forward.
1. Drive chain slack adjusting bolt
2. Locknut
6. Remove the drive chain from the
ZAUM1194
6-38
1 2
(a)
rear sprocket.