Procedure For Tilting Down (Power Trim And Tilt Models); Shallow Water; Power Trim And Tilt Models - Yamaha F100D Owner's Manual

EMU35517
Procedure for tilting down (power trim
and tilt models)
1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
UP
DN
DN
"
DN
EMU28063
EMU32852

Power trim and tilt models

The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00261
NOTICE
Do not tilt the outboard motor up so that
"
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32914
Procedure for power trim and tilt models
1. Place the remote control lever / gear shift
lever in neutral.
ZMU01936
Operation

Shallow water

ZMU04255
59