Cruising In Other Conditions - Yamaha F100D Owner's Manual

Operation
2. Slightly tilt the outboard motor up to the
desired position using the power trim
and tilt switch. WARNING! Using the
power trim and tilt switch on the bot-
tom cowling while the boat is moving
or engine is on could increase the risk
of falling overboard and could distract
the operator, increasing the risk of
collision with another boat or an ob-
stacle.
[EWM01851]
3. To return the outboard motor to the nor-
mal running position, press the power
trim and tilt switch and slowly tilt the out-
board motor down.
EMU35392

Cruising in other conditions

Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
outside of the outboard motor with fresh wa-
ter.
60
Cruising in muddy, turbid, or acidic water
Water in some areas can be acidic or with a
lot of sediment in it, such as muddy or turbid
(cloudy) water. After operating in such water,
flush the cooling passages with fresh water to
prevent corrosion. Also rinse the outside of
the outboard motor with fresh water.