Starting Engine - Yamaha F100D Owner's Manual

Operation
TIP:
Wipe up any spilled gasoline immediately
with dry rags. Dispose rags properly accord-
ing to local laws or regulations.
3. Squeeze the primer pump, with the ar-
row pointing up, until you feel it become
firm. During engine operation place the
tank horizontally, otherwise fuel cannot
be drawn from the fuel tank.
1. Arrow
EMU27495

Starting engine

EWM01601
WARNING
Before starting the engine, make sure that
the boat is tightly moored and that you can
steer clear of any obstructions. Be sure
there are no swimmers in the water near
you.
48
EMU38631
Electric start / prime start models
EWM01841
 Failure to attached engine shut-off cord
could result in a runaway boat if opera-
tor is ejected. Attach the engine shut-off
cord to a secure place on your clothing,
or your arm or leg while operating. Do
not attach the cord to clothing that
ZMU02024
could tear loose. Do not route the cord
where it could become entangled, pre-
venting it from functioning.
 Avoid accidentally pulling the cord dur-
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power, the
boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
1. If the lock mode of the Yamaha Security
System is selected, use the remote con-
trol transmitter to select the unlock
mode. Short beep will sound twice when
unlocking the Yamaha Security System.
For further information, see page 18.
TIP:
 If you lost track of the current security
mode, press the lock or unlock button to
reset the security system.
 The signal transmission range of the re-
mote control transmitter varies depending
on the mounting position of the receiver. To
operate the Yamaha Security System cor-
rectly, use the transmitter as close as pos-
sible from the receiver.
 If Yamaha Security System may not oper-
ate correctly, repeat the activating proce-
dure once again.
2. Place the gear shift lever in neutral.
WARNING