INSTRUMENT AND CONTROL FUNCTIONS
fuel reserve tripmeter mode "TRIP F"
and start counting the distance traveled
from that point. In that case, pushing
the "SELECT" button switches the dis-
1
play between the various tripmeter and
odometer modes in the following order:
TRIP F → TRIP 1 → TRIP 2 → ODO →
2
TRIP F
To reset a tripmeter, select it by push-
3
ing the "SELECT" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
4
reserve tripmeter manually, it will reset
itself automatically and the display will
5
return to the prior mode after refueling
and traveling 5 km (3 mi).
6
NOTE:
The display cannot be changed back to
7
"TRIP F" after pushing the "RESET"
button.
8
Fuel gauge
9
The fuel gauge indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel gauge disappear to-
wards "E" (Empty) as the fuel level
decreases. When only one segment is
left near "E", the fuel level warning indi-
cator and the last fuel gauge segment
will flash. Refuel as soon as possible.
Self-diagnosis device
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
odometer/tripmeter
will
two-digit error code (e.g., 11, 12, 13).
If the odometer/tripmeter indicates
such an error code, note the code num-
ber, and then have a Yamaha dealer
check the vehicle.
CAUTION:
If the odometer/tripmeter indicates
an error code, the vehicle should be
checked as soon as possible in or-
der to avoid engine damage.
3-8
Anti-theft alarm (optional)
This model can be equipped with an
optional anti-theft alarm by a Yamaha
dealer. Contact a Yamaha dealer for
more information.
indicate
a
ECA11520
EAU12331