Checking The Front And Rear Brake Pads; Checking The Brake Fluid Level - Yamaha TDM900 Owner's Manual

Hide thumbs Also See for TDM900:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
Checking the front and rear
brake pads
The front and rear brake pads must be
1
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
2
Front brake pads
3
4
5
6
7
1. Brake pad wear indicator groove
8
Each front brake pad is provided with a
wear indicator groove, which allows
9
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear
indicator groove has almost disap-
EAU22390
peared, have a Yamaha dealer replace
the brake pads as a set.
Rear brake pads
EAU22420
1
1. Lining thickness
Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
thickness is less than 0.8 mm (0.03 in),
have a Yamaha dealer replace the
brake pads as a set.

Checking the brake fluid level

Front brake
EAU22500
1
1. Minimum level mark
Rear brake (for TDM900)
1. Minimum level mark
6-20
1
EAU38640
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tdm900aTdm twin 900

Table of Contents