Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha TDM900 Owner's Manual

Hide thumbs Also See for TDM900:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
bulb
1. Remove
the
1
page 3-14.)
2. Remove the socket (together with
the bulb) by turning it counter-
2
clockwise.
3
1
4
5
6
1. Socket
7
3. Remove the defective bulb by
pushing it in and turning it counter-
8
clockwise.
4. Insert a new bulb into the socket,
9
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the seat.
EAU24080
Replacing a turn signal light
bulb
seat.
(See
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Turn signal light lens
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24202
2
1. Turn signal light bulb
1
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
6-32
1
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
ECA11190

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tdm900aTdm twin 900

Table of Contents