Reception Signal; Clock Display - Oregon Scientific WeatherBox BAR383HG User Manual

STRONG WEAK
The reception icon will blink when it is searching for a
signal. If the radio signal is weak, it can take up to 24
hours to get a valid signal reception.

RECEPTION SIGNAL

To force the sensor to search for clock signals:
•
Press and hold SEARCH on the sensor for 2
seconds.
Clock area reception indicator:
ICON DESCRIPTION
Connection between main unit and
sensor collecting signals
Sensor signal reception
Main unit has contacted sensor; time
is synchronised
Main unit has contacted sensor; time
is not synchronised
Main unit has lost contact with sensor;
time is synchronised
Main unit has lost contact with sensor;
time is not synchronised
Main unit cannot contact sensor
No icon Clock reception disabled
To toggle clock reception ON/OFF:
BAR383HG_M_EN_R9.indd 6
1. Press MODE / SNOOZE to select Clock display
NO SIGNAL
2. Press and hold SEARCH SENSOR/ RF CLOCK for
To force the clock to search for the sensor and
retrieve clock signals:
1. Press MODE / SNOOZE to navigate to the Weather
2. Press and hold MEMORY /
ICON
NOTE If the sensor is still not found, check the batteries,
obstructions and remote unit location.

CLOCK DISPLAY

Rotate MODE / SNOOZE when clock display area is
selected to choose between the following display modes:
•
•
•
•
•
6
area. appears to indicate the area selected.
two seconds to enable / disable clock reception.
display area.
seconds.
DESCRIPTION
Main unit searching for
sensor
Sensor channel has been
found
The sensor cannot be
found.
Clock with seconds
Clock with weekday
Calendar with weekday
Time offset clock with weekday
Alarm
ON / OFF for 2
4/12/06 5:24:14 PM