Temperature And Humidity; Maximum / Minimum Records; Backlight; Reset - Oregon Scientific WeatherBox BAR383HG User Manual

ICON

TEMPERATURE AND HUMIDITY

To toggle temperature unit:
Press °C / °F on the main unit.
To select sensor displayed:
1. Press MODE / SNOOZE to select Weather area.
2. Rotate MODE / SNOOZE.
number currently displayed.
NOTE indicates indoor temperature and humidity
is displayed.
To activate auto-scan between sensors:
1. Press MODE / SNOOZE to select Weather area.
2. Press and hold MODE / SNOOZE for 2 seconds.
Each sensor's data will be displayed for 3 seconds.
3. To deactivate auto-scan press MEMORY/
OFF or rotate MODE / SNOOZE.
NOTE If you select a sensor that collects only
temperature data, humidity information will not be
shown.
BAR383HG_M_EN_R9.indd 8
DESCRIPTION
Sunny
Partially cloudy
Cloudy
Rainy
Snowy
indicates the sensor
ON /

MAXIMUM / MINIMUM RECORDS

1. Press MODE / SNOOZE to select Weather area.
2. Press MEMORY /
/ minimum and current settings for the sensor
selected.
To clear maximum and minimum records press and hold
MEMORY / ON / OFF for 2 seconds.

BACKLIGHT

Press MODE / SNOOZE to activate the backlight for 8
seconds.

RESET

To return the main unit to the default settings use a thin
blunt object such as a ballpoint pen to press RESET.
To reset the sensor press RESET in the battery
compartment.

PRECAUTIONS

This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are
a few precautions:
•
Do not cover the ventilation holes. Make sure items
that are nearby such as newspapers, tablcloths,
curtains etc cannot accidentally cover the ventilation
holes.
•
Do not subject the unit to excessive force, shock,
8
ON / OFF to toggle maxmum
4/12/06 5:24:17 PM