Reception Signal; Set Clock; Alarm - Oregon Scientific BAR310HG User Manual

RECEPTION SIGNAL

To enable and force a signal search:
Press and hold for 2 seconds.
To disable the signal reception:
Press and hold for 2 seconds.
Clock signal reception indicator:
STRONG WEAK
SIGNAL SIGNAL

SET CLOCK

If the clock signal reception is enabled and a signal is being
received the clock does not need to be manually set..
1. Press and hold MODE for 2 seconds.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone offset, 12/24 hr format,
hour, minute, year, day/month format, month, day and
language.
NOTE
The time zone offset can be used to set the clock
up to + / - 23 hours from the received clock signal time. If
you have disabled the clock signal reception (i.e. manually
setting the clock), do not set a value for time zone offset.
NOTE
The language options are English (E), German (D),
French (F), Italian (I), and Spanish (S).
Press MODE to choose between the following display
modes:
• Clock with seconds.
• Clock with weekday.
• Clock with calendar.
• Clock with time zone offset.
NO SIGNAL

ALARM

To set the alarm:
1. Press
2. Press and hold
3. Press
4. Press
To activate / deactivate the alarm:
1. Press
2. Press
To silence the alarm:
•
OR
•
6
to enter alarm mode.
for 2 seconds.
/ to set hour / minute.
to confirm.
to display alarm time.
again to turn alarm ON / OFF.
Press SNOOZE to silence it for 8 minutes
Press any key except SNOOZE to turn the alarm off
and activate it again after 24 hours.
indicates alarm is ON.