Yamaha big bear 250 YFM25BA Owner's Manual page 62

opening, even when the throttle lever is pushed to
the maximum. Turning in the adjusting screw limits
the maximum engine power available and de-
creases the maximum speed of the ATV. Turning
in the adjusting screw decreases top speed, and
turning it out increases top speed. (See page 4-4.)
7
1. Adjusting screw
Loading and accessories
EWB01462
WARNING
Improper loading or towing can increase the
risk of loss of control, an overturn, or other ac-
cident. To reduce the risk of an accident:
G
Do not exceed the maximum loading limits
for the vehicle (see "MAXIMUM LOADING
LIMIT" in this section or vehicle labeling).
G Keep weight on racks centered side to side,
and as low as possible. Be sure cargo is se-
cured – a loose load could change handling
unexpectedly.
G
Make sure the load does not interfere with
your control or ability to see where you are
going.
G Tie down cargo in the trailer securely. Make
sure cargo in the trailer cannot move around.
A shifting load can cause an accident.
G
Reduce speed and allow more room to stop.
A heavier vehicle takes longer to stop.
G
Avoid hills and rough terrain. Choose terrain
carefully. Use extreme caution when towing
or carrying a load on inclines.
G Turn gradually and go slowly.
Take extra precautions when driving with a load or
trailer. Follow these instructions and always use
common sense and good judgment when carrying
cargo or towing a trailer.
7-6