Starting A Warm Engine; Operating The Drive Select Lever And Driving In Reverse - Yamaha big bear 250 YFM25BA Owner's Manual

EBU20291

Starting a warm engine

Follow the same procedure as for starting a cold
engine, with the exception that the starter (choke)
is not required when the engine is warm. Instead,
start the engine with the throttle slightly open.
EBU20321
Operating the drive select lever and
driving in reverse
ECB00170
NOTICE
Before shifting, stop the ATV, otherwise the
transmission may be damaged.
Shifting: Reverse to Forward
1. Bring the ATV to a complete stop.
2. Apply the brake pedal.
3. Move the drive select lever forward until it
completely stops.
1
1. Drive select lever
2. Forward "F"
3. Reverse "R"
4. Release the brake pedal, and then open the
throttle lever gradually.
Shifting: Forward to Reverse
EWB00720
WARNING
Improper operation in reverse could make you
hit an obstacle or even a person behind you,
resulting in serious injury. When you shift into
reverse, make sure there are no people or ob-
stacles behind you. When it is safe to proceed,
go slowly.
6-3
F 2
R 3
6