1. Brake lever free play
2. Locknut
3. Brake lever free play adjusting bolt
a. Loosen the locknut at the brake lever and
8
fully turn in the brake lever free play adjust-
ing bolt.
b. Turn the brake lever free play adjusting nut
on the brake cable at the rear wheel hub so
that the distance between the brake cam-
shaft lever and the pin, gap "A", measures
0–1 mm (0–0.04 in).
3
4
1. Brake lever free play adjusting nut
2. Brake camshaft lever
3. Pin
4. Gap "A"
c. Turn the brake lever free play adjusting
bolt at the brake lever in direction (a) to in-
crease the free play, and in direction (b) to
decrease it.
8-33
2
1