Yamaha big bear 250 YFM25BA Owner's Manual page 42

ITEM
Rear brake
Throttle lever
Control cables
Wheels and tires
5
Shift pedal
Brake pedal
Brake levers
Chassis fasteners
Instruments, lights and
switches
Battery
• Check operation, and correct if necessary.
• Lubricate cable if necessary.
• Check lever and pedal free play, and adjust if necessary.
• Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
• Check lever free play, and adjust if necessary.
• Make sure that operation is smooth. Lubricate if necessary.
• Check wheel condition, and replace if damaged.
• Check tire condition and tread depth. Replace if necessary.
• Check air pressure. Correct if necessary.
• Make sure that operation is smooth.
• Correct if necessary.
• Make sure that operation is smooth. Lubricate pedal pivoting point if
necessary.
• Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Check operation, and correct if necessary.
• Check electrolyte level. Fill with distilled water if necessary.
ROUTINE
5-2
PAGE
5-3, 8-28, 8-31
5-4, 8-27
8-35
5-4
8-37
8-37
8-36
5-6
5-6
5-6, 8-39