Installing The Seat; Installing The Seat Belt; Installing The Manual Tube - Toro 30344 Operator's Manual

1. Handle
3

Installing the Seat

Parts needed for this procedure:
Seat, Model 30398 and the Mechanical Seat
Suspension Kit, Model No. 30312 or the Pneumatic
1
Seat Suspension Kit, Model No. 30313 (obtained
separately)
Procedure
The Groundsmaster 3280-D is shipped without the seat
assembly. Obtain and install the optional seat (Model 30398)
and the Mechanical Seat Suspension Kit (Model 30312) or the
Pneumatic Seat Suspension Kit (Model 30313). Refer to the
seat kit for the installation instructions.
Note: Obtain and install the Auxiliary Power Unit Kit
(Model 30382) before installing a Pneumatic Suspension Seat
Kit to the machine.
Note: Refer to
5 Installing the Manual Tube (page 16)
mounting the seat to the seat suspension.
Figure 5
2. Hood-cable bracket
4

Installing the Seat Belt

Parts needed for this procedure:
2 Seat belt
2 Bolts
2 Lock washer
2 Flat washer
Procedure
Install each end of the seat belt in the holes in the back of the
seat with 2 bolts (7/16 x 1 inch), flat washers (7/16 inch),
and lock washers (7/16 inch)
Important: Mount the latch side of the belt to the right
side of the seat.
1. Seat-belt latch
5
before

Installing the Manual Tube

Parts needed for this procedure:
1 Manual tube
2 R-clamp
Procedure
1. Remove the manual tube and R-clamps secured to the
seat plate.
Note: Discard the 2 mounting bolts and flat washers.
16
(Figure 6).
Figure 6