Mobile Printing; Install Software - Epson SureColor P400 Series Start Here

4
Attach the single sheet guide by aligning the notches on its base with the
slots on the back of the printer. Then hook the tabs over the top of the
slot (marked with orange triangles).
5
Turn on the printer so it can load the paper correctly.
6
Insert one sheet of paper printable side up against the right edge, then
slide the edge guide over.
Note: Don't load paper sideways. Always load it short edge first.
7
Push the paper into the printer until it meets resistance and hold it there
until the printer pulls it in slightly. When the printer begins feeding the
paper, let go of it.

Install Software

An Internet connection is required to obtain the printer software.
Note:
1
Make sure the printer is
NOT CONNECTED to your
computer.
If you see a Found New
Windows :
®
Cancel
Hardware screen, click
disconnect the USB cable.
2
Download and run your product's software package:
www.epson.com/support/p400downloads (U.S.)
www.epson.ca/support/p400downloads (Canada)
3
Follow the instructions on the screen to run the setup program.
OS X: Make sure you install Epson Software Updater to receive firmware
and software updates for your product.
and
4
When you see the Select Your Connection screen, select one of the
following:
• Wireless connection
In most cases, the software installer automatically attempts to set up
your wireless connection. If setup is unsuccessful, you may need to
enter your network name (SSID) and password.
• Direct USB connection
Make sure you have a USB cable (not included).
• Wired network connection
Make sure you have an Ethernet cable (not included).

Mobile printing

To print from a mobile device, your product must be set up for wireless
printing or Wi-Fi Direct . See the online User's Guide for instructions.
®
™
iOS/Android
www.epson.com/iprint
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID). The printer can only
connect to a network that support 2.4 GHz.
If you see a firewall alert message, click
•
continue.
• If your network has security enabled, make sure you enter your network
password (WEP key or WPA passphrase) correctly. Passwords must be
entered in the correct case.
Setup is unable to find my printer after connecting it with a
USB cable.
Make sure it is securely connected as shown:
Any questions?
Basics
Basic information and troubleshooting.
User's Guide
Click the icon on your desktop or Apps screen to access the online
Windows:
User's Guide.
Applications/Epson Software/Guide
OS X: Click the icon in
online User's Guide.
If you don't have a User's Guide icon, go to the Epson website, as described in
the next section.
™
Epson Connect
Connect wirelessly from your tablet,
smartphone, or computer. Print documents
and photos from across the room or around
the world.
www.epson.com/connect
Unblock or Allow to let setup
to access the