Step 1 - Cables
Connec ons
1. Connect the Ethernet cable to the NAS and the router.
2. Connect the power cable to the NAS and the outlet.
You can also connect:
A second Ethernet cable for redundancy or performance.
Cable management: Careful management of cables is recommended for optimal operation. It
prevents potential hazards and allows for easier maintenance.
Step 2 - Insert hard drives
Consider the following before inserting hard drives into the enclosure:
Seagate recommends installing the hard drives into the diskless enclosure from left to right.
Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay
4/13/15
40