Step 2 - Power On The Wss Nas - Seagate SRPS20 User Manual

1. Connect the Ethernet cable to the NAS and the router.
2. Connect the power cable to the NAS and an active power outlet.
You can also connect:
A second Ethernet cable for redundancy or performance.
Cable management: Careful management of cables is recommended for optimal operation. It

prevents potential hazards and allows for easier maintenance.
Step 2 – Power on the WSS NAS
1. Push the power button on the front of the WSS NAS.
Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay 4/13/15 36