Administrator Setup - HighSecLabs K304 User Manual

Administrator Setup

Now that the Secure KM Switch is connected and powered on it is
good opportunity to setup some essential operational settings.
The first and most important setting of the KM is the display
positioning. It is essential that the KM switch configuration will match
the actual positioning on the displays.
There are two ways to configure the KM switch with the actual
display setup:

Select one of the predefined setups

Create a configuration file and load it to the KM
Selecting one of the predefined setups
It is also possible to load one of the default settings available in the
KM non-volatile memory. To select a default configuration type on
the console keyboard: Control + Control + F11 + Fx (see numbers in
the figure to the right). Additional settings can be accessed through
Control + Control + F11 + x + y. The configuration loaded will include
in additional to the displays arrangement:
- All displays are 1920 x 1200 resolution, same size (26" diagonal)
- Mouse acceleration is set to 6
- Mouse speed is set to 5
- VDT is enabled
- Prevent transition while dragging feature is Enabled
Creating a configuration file
In case the required configuration does not appear on the predefined
configurations list the administrator can create a configuration file
using HSL's KM Web Configuration Tool and load it to the KM. for
more information about this option please refer to HSL's Web
Configuration Tool user manual.
17
4 & 8 port Secure KM Switch User Manual
For example: typing Control + Control + F11 + F5 will set the left
display to computer #1 (single-head), second display to computer #2
(single-head), third display to computer connected to port #3 (dual-
head primary output) and the forth display to same computer
secondary display output.