Advertisement
VersaBALL_User's_Guide_v1.9.qxd
10/7/2004
2:55 PM
Introduction
THANK YOU
for purchasing the Horizon Fitness Functional FX
Fitness is dedicated to providing our customers with efficient and effective fitness solutions. Look for more
Functional FX
TM
products in the near future at your nearest fitness retailer or online at www.horizonfitness.com.
WARNING!
Consult a physician before beginning any exercise program. Immediately discontinue use of this prod-
uct if you feel faint or dizzy. If you suffer from heart disease, high blood pressure or any other disease
or condition, consult your physician prior to use. If this equipment is not assembled and used properly,
serious bodily injury can occur. Serious bodily injury can also occur if the enclosed instructions are not
followed correctly. Keep pets and children away from machine when in use. Always make sure hard-
ware is tightened prior to use and make sure to follow all safety instructions in this manual.
WEIGHT CAPACITY
Weight on this product should not exceed 350lbs. This includes user weight plus any other type of
resistance that has additional weight.
Page 4
TM
VersaBALL FX
TM
Trainer. Horizon
3
Storage
To store the Ball Product keep it in a clean, dry place away from direct sunlight. For smaller storage
areas, you can deflate the ball.
Resistance bands can be stored within the base ring. Lock the bands from side to side for convenient
storage.
Maintenance
Examine the ball for damage or wear before each use. Give special attention to ball discoloration
and scratching; if either of these exist call Horizon Fitness to replace ball.
CARE:
1. It is the responsibility of the owner to provide regular maintenance.
2. Clear workout area of sharp objects that could puncture ball. Use only smooth surface when using
ball outside of frame.
3. Slight air leakage may occur over time. Re-inflate when necessary.
4. Hand wash ball with soft, damp and soapy cloth.
5. Do not use harsh or abrasive chemicals or cleaning tools that could damage ball or paint on frame.
6. Avoid placing ball on printed materials as ink could permanently mark ball.
7. Avoid exposing the ball to heat or direct sunlight.
RESISTANCE BANDS AND BALL REPLACEMENT
If the resistance bands or ball becomes cut, nicked, or gouged in any way do not use. To purchase a
replacement please contact us. See back panel for contact information.
12
Advertisement
