Toro 07359 Operator's Manual page 36

Replacing the Carbon Canister
1. Remove the vacuum hose from the fitting on the
carbon canister marked Purge
1. Vacuum hose
2. Fuel-tank hose
3. Carbon-canister fitting
(Fuel Tank)
2. Remove the fuel-tank hose from the fitting on the
carbon canister marked Fuel Tank
3. Lift the carbon canister from the carbon-canister
mount in the fuel tank
(Figure 45).
Figure 45
4. Carbon-canister fitting
(Purge)
5. Front of the machine
(Figure 45).
(Figure 46).
1. Carbon canister
2. Carbon-canister mount
(fuel tank)
4. Remove the carbon-canister filter and the short section
of hose from the lower fitting of the old carbon canister
(Figure 47).
1. Lower fitting (carbon
canister)
2. Hose
5. Install the hose onto the lower fitting of the new
carbon canister
6. Insert the fitting of a new carbon-canister filter into
the hose (Figure
36
Figure 46
3. Front of the machine
Figure 47
3. Carbon-canister filter
(Figure 47).
47).