Greasing The Front Wheel Bearings - Toro 07359 Operator's Manual

Greasing the Front Wheel
Bearings
Service Interval: Every 300 hours
Grease specification: Mobilgrease XHP™-222
Removing the Hub and Rotor
1. Lift the front of the machine and support it with jack
stands.
2. Remove the 5 lug nuts that secure the wheel to the hub
(Figure 27).
1. Lug nut
2. Wheel
Figure 27
3. Hub
3. Remove the flange-head bolts (3/8 x 1 inch) that secure
the bracket for the brake assembly to the spindle and
separate the brake from the spindle
Note: Support the brake assembly before proceeding
to the next step.
1. Caliper bracket (brake
assembly)
2. Spindle
4. Remove the dust cap from the hub
1. Dust cap
2. Nut retainer
3. Spindle nut
5. Remove the cotter pin and nut retainer from the
spindle and spindle nut
28
(Figure 28).
Figure 28
3. Flange-head bolts (3/8 x
1 inch)
(Figure 29).
Figure 29
4. Tab washer
5. Spindle
6. Cotter pin
(Figure 29).