Sound Pressure Level; Sound Power Level; Vibration Level; Safety And Instructional Decals - Toro 30410 Operator's Manual

• The engine must be shut off before checking
the oil or adding oil to the crankcase.
• If major repairs are ever needed or if assistance
is desired, contact an Authorized Toro
Distributor.
• To make sure of optimum performance and
continued safety certification of the machine,
use only genuine Toro replacement parts
and accessories. Replacement parts and
accessories made by other manufacturers could
be dangerous, and such use could void the
product warranty.

Sound Pressure Level

This unit has an equivalent continuous A-weighted
sound pressure level at the operator ear of 89 dBA,
based on measurements of identical machines per
EN 11094 and EN 836.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any decal that is damaged or lost.
93-7272
1. Cutting/dismemberment hazard; fan—stay away from
moving parts.
93-7275
1. Read the Operator's Manual.
2. Do not use starting aids.

Sound Power Level

This unit has an equivalent continuous A-weighted
sound power level at the operator ear of 105
dBA/1 pW, based on measurements of identical
machines per EN 11094.

Vibration Level

Hand-Arm
This unit has an equivalent continuous A-weighted
hand/arm vibration level of 2.5 m/s
measurements of identical machines per EN 1033.
Whole Body
This unit has an equivalent continuous A-weighted
hand/arm vibration level of 0.5 m/s
measurements of identical machines per EN 1033.
93-7818
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N•m (85 to 110
ft-lb).
100-5623
1. Low height of cut
adjustment
8
2
, based on
2 , based on
2. High height of cut
adjustment