Setup; Installing The Seat, Seat Belt, And Manual Tube - Toro 30410 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Seat kit (obtain separately)
Seat suspension kit (obtain
separately)
Manual tube
1
R-clamp
Seat belt
Bolt
Lock washer
2
No parts required
3
Warning Decal
Operator's Manual
Engine Operator's Manual
Parts Catalog
4
Operator Training DVD
Pre-delivery Inspection Sheet
CE certicate
Note: Determine the left and right sides of the
machine from the normal operating position.
Note: Use this chart as a checklist to ensure
that all parts necessary for assembly have been
received. Without these parts, total setup cannot
be completed. Some parts may have already been
assembled at the factory.
Description
Step
Installing the Seat, Seat
Belt, and Manual Tube
Parts needed for this step:
Procedure
The machine is shipped without the seat assembly.
A Premium Seat, Model No. 30622 and a Premium
Suspension, Model No. 30621, must be purchased
and installed.
14
Qty.
1
1
1
Install the seat, seat belt, and
2 manual tube.
1
2
2
–
Grease the machine.
Used only on machines outside the
1
U.S.A.
1
1
Read the manuals and watch the
1
DVD before operating the machine.
Use the remaining parts for the
1
installation of attachments.
1
1
1
1
Seat kit (obtain separately)
1 Seat suspension kit (obtain separately)
1
Manual tube
2 R-clamp
1 Seat belt
2 Bolt
2 Lock washer
Use