General Characteristics - Cembre HT81-U Operation And Maintenance Manual

04
51
67
34
FIG. 4 TOOL POSITION FOR MAINTENANCE OPERATIONS
POSITION DE L'OUTIL POUR L'ENTRETIEN
WERKZEUG WARTUNGPOSITION
COLOCACION PARA LAS OPERACIONES DE MANTENIMIENTO
POSIZIONAMENTO PER LE OPERAZIONI DI MANUTENZIONE
01
03
59
29
HYDRAULIC CRIMPING TOOL

1. GENERAL CHARACTERISTICS

– Application range: compression of electrical connectors on conductors up
to .............................................................. 240 mm
– Crimping force: ....................................................................... 80 kN
– Rated operating pressure: ..................................................... 700 bar
– Dimensions: length ................................................................. 485 mm
width with handles closed .................................. 141,5 mm (5.5 in.)
width handles open ............................................ 341 mm
– Weight (without dies): .............................................................. 3,4 kg
– Recommended oil: ................................ AGIP ARNICA 32
– Operating positions. The three operating positions are identifi ed on the main handle,
which rotates relative to the reference point
Rest position (Handles locked): lock handles together when
tool is not in use.
Release position: close the moveable handle (51) against
the main handle (04), in order to discharge the oil pressure
and retract the dies.
Operating position: operate the moveable handle (51), to
build up pressure and close the dies.
– Advancing speed: the tool has two forward speeds of the ram and automatically
switches from a fast advancing speed of dies to a slower crimping speed.
– Safety: the tool is provided with a max pressure valve. Optional extra MPC1 special
manometer is available for checking the valve setting.
2
ENGLISH
HT81-U
2 (500 MCM)
(9 sh ton)
(10,000 psi)
(19.09 in.)
(13.4 in.)
(7.5 lbs)
or
or equivalent
SHELL TELLUS OIL TX 32
(see Fig. 1).