Belt Clip Installation; Headset Connection - Yaesu FTA-750 SPIRIT Operating Manual

Belt Clip Installation

You may mount the clip to the rear of the FTA-750/
FTA-550 using the supplied screws.
D A
T A
E X
T
D C
16
B
eFore
SHB-11
Belt Clip
with two screws (M3 x 8)
y B
ou egIn

Headset Connection

You may use an optional headset through the supplied
SCU-15 Headset Adapter Cable (see also Page 87).
SCU-15
Headset Adapter Cable
1. Remove the cover and two screws of the MIC/SP
jack located on the right side of the transceiver.
2. Insert the plug of the SCU-15 to the MIC/SP jack.
3. Fix the plug with two screws attached to the SCU-
15.
 Either of the plug directions are acceptable as
long as the both screws fit the screw holes.
4. Insert the plugs of the headset to the sockets of the
SCU-15.
FTA-750/FTA-550 O
Headset
(not supplied)
M
perATing AnuAl