Yaesu FTA-750 SPIRIT Operating Manual page 62

Scanning the marked channels
 Set the radio to the MR or WX mode, then perform
steps 2 to 4 of the section "Scanning All Channels"
in the previous page.
The scanning starts and the display returns to the
MR or WX mode screen.
 The FTA-750/FTA-550 operate in the same way
as that when scanning all channels described in the
previous page, except that it searches a signal on the
marked frequencies only.
Note:
When you enable the alarm function at reception of the
weather alert signal via the COMM SETUP menu in the
SETUP mode, the last weather channel will be watched
as the every second channel during a scan.
Example: when the last weather channel is WX03, the
radio scans in the following order.
MEM001 → WX03 → MEM002 → WX03 →
MEM003 → WX03 ...
60
s o
cannIng peratIon
The frequency of the last
weather channel, however,
will not be displayed until
the scanner encounters the
weather alert signal.
FTA-750/FTA-550 O
BUSY
132.400
MR
FLG MEM
SCANNING
VOL
132.400 Las Vega
130.800 Los Alam
127.600 MIAMI
129.200 Mojave
124.250 North
125.550 WW1FRQ
M
perATing AnuAl