Table of Contents
Advertisement
TRENDnet User's Guide
Option 3: Connect Camera by Using a Network Cable (PoE)
1. Insert the Installation CD into your computer's CD-ROM drive to initiate the
Auto-Run program. Click the Install Camera.
2. Write down the MAC ID of the camera. Click Next.
© Copyright 2015 TRENDnet. All Rights Reserved.
3. Connect a network cable to the camera's network port to a PoE switch. The IR
LED will be on. Allow 60 seconds for the camera to boot up. Click Next.
4. Wait while searching the cameras.
TV-IP322WI
14
Hide quick links:
Advertisement
Table of Contents
