In case of stand alone tank, available ESP during DHW mode: to be con¿ rmed
1. The ESP curves are the maximum ESP curve for different T types (pump rpm = 4400
The pump of the indoor module is inverter controlled and controls to have a ¿ xed
2. In case of installing a demestic hot water tank there is an additional pressure drop over the three way valve (delivered as accessory with the tank).
ESP: external static pressure
Flow: waterÀ ow through the unit
Warning:
1. Selecting a À ow outside the curve can cause damage to or malfunction of the unit. See also minimum and maximum allowed water À owrange
in the technical speci¿ cations.
2. Water quality must be according to EN directive EC 98/83 EC.