Download Print this page
GRAUPNER JODEL ROBIN DR 400/180 Instructions Manual

GRAUPNER JODEL ROBIN DR 400/180 Instructions Manual

Hide thumbs Also See for JODEL ROBIN DR 400/180:

Advertisement

Quick Links

Re: Order No. 9370
9370.M
Instructions
JODEL ROBIN DR 400/180
For internal combustion motors up to 58 cm³
Requires a HoTT radio control system with 5 functions
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the JODEL ROBIN DR 400/180 and is the answer not in the manual?

Questions and answers

Summary of Contents for GRAUPNER JODEL ROBIN DR 400/180

  • Page 1 JODEL ROBIN DR 400/180 For internal combustion motors up to 58 cm³ Requires a HoTT radio control system with 5 functions GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 2 When putting screws into wood, apply a little casein glue to keep them from loosening: Squirt casein glue into the drill hole and screw in the screw. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 3 Particularly recommended: Computer systems MC-22s to MC-24. Servos with standard dimensions can be installed. As receiver battery, we recommend: two GRAUPNER 5N-5000 NiMH Order No. 98903.5, which must always be serviced well before and after flight operations, meaning that the battery has to be charged and discharged again multiple times until the specified capacity has been reached.
  • Page 4 If you are not satisfied with any component, report it to your retailer before you start the construction process. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 5 Until the glue hardens, the servos are installed in the corresponding mounts and fastened into the wing or tailplane. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 6 (such as UHU schraubensicher) and lock nuts to secure them against loosening. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 7 Screw the pushrods together as shown in the following photos. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 8 Drill pilot-holes in the wings for the retaining screws; then screw the tabs and the wheel fairing support block to the wing. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 9 Route the connecting leads of the two diodes to the root rib using a piece of thread, and run they out of the drilled access hole. The plastic holder can now be glued in GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 10 GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 11 As shown in the photo, fix the fairing support block to the nose gear using an M4 Allen screw and nut. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 12 The aluminium part must be shortened enough so that the clevis can move freely; adjust the rods accordingly. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 13 Mark the silicone tubes with a felt marker to show which of them runs to the motor, the overflow, and the filler. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 14 Four holes for the rubber damping elements have to be drilled into the firewall to match the particular engine. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 15 Ø 4.2 mm holes and attach the brackets to the fuselage using M4 Allen bolts and captive nuts. Now, the silencer can be attached to the GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 16 To do so, cut four strips of scrap wood and drill a Ø 3 mm hole in each one as shown in the photo. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 17 1.5-2 mm from the engine bonnet. In this position, mark the four attachment points on the engine bonnet. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 18 Glue the seat backs and pilot figure in the proper positions as shown in the following photos. The parts should be affixed using double-sided tape, such as Order No. 2904. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 19 Order No. 35060. Slide the wing halves completely onto the fuselage and connect GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 20 All that remains is to wish you many hours of happy flying your JODEL ROBIN DR 400/180. Your Team ! GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 21: Safety Notes And Warnings

    • You alone are responsible for the safe operation of your model and motor. • Questions regarding the safe operation of model and motor can be answered by your retailer. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 22 As an alternative start aid for fixed-wing models, a wooden dowel with a piece of watering hose attached can be used, for example. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors! 11/2011...
  • Page 23 • These notes are intended only to make you aware of the many dangers and hazards that can arise if you work carelessly or irresponsibly. If you take GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 24 For this reason GRAUPNER assumes no liability for loss, damage, or costs, which are incurred due to the incorrect use of our products or due to improper behaviour on the part of the user, or which are connected with such operation in any way.
  • Page 25 • Before you fly the model, check that the radio control system is working reliably, and that all connections are secure. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!
  • Page 26 • If the model is not to be operated for a considerable time, all the moving parts must be cleaned and re-lubricated. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY We reserve the right to introduce modifications. Not liable for printing errors!