Start Autolog; View Autolog Data; Setup - Hanna Instruments HI98192 Instruction Manual

This feature allows the user to log up to 1000 readings.
All logged data can be transferred to PC through USB port.
The memory space is organized in lots of records. A lot can contain from 1 to 1000 records. The
maximum available lots number is 100.

START AUTOLOG

Set the desired logging interval in the Setup menu.
If 5, 10, 30 s or 1 min interval is selected, the Auto Power Off feature is disabled (each sample
stored restarts the Auto Power off counter). For other intervals, the instrument will enter a sleeping mode.
During this mode the instrument continues to monitor the inputs and memorize the reading at the set
interval. To exit sleeping mode, simply press any key (exception ON/OFF).
Note: While in sleeping mode the instrument cannot be powered off by pressing ON/OFF
key. Leave sleeping mode and then press ON/OFF key to power off the instrument.
To start autolog from the measurement screen press StartLog key. The lot number and the amount
of memory space is displayed for several seconds.
If the autolog space is full or the lots number exceeds 100 the "Auto log space full" message is
displayed.

VIEW AUTOLOG DATA

Press RCL key to enter View Logged Data mode.
50