Setting Up The Unit - iHome HiP50 User Manual

Attach Rear Security Cover After Staff Adjusts These Control Settings and Functions
Access to the power supply jack, DST switch, time set, time sync, time zone and room volume settings is on the rear of
the unit. Attach the rear cover using the supplied thumbscrew once these settings are complete to prevent tampering.
Remove cover for any future adjustments and reattach once adjustments are completed.
Connect Unit to Power Source
Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120V AC wall socket. Adaptor must
be plugged in to operate unit. The unit does not operate on batteries (a battery back up system maintains clock settings
during power failures).
Setting the Clock Time Using Time Sync
The Time Sync feature allows you to sync the time setting on the unit to the time on your iPhone or recent model iPod (iPod
touch, iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature).
1. Press and release the Time Sync Button located at the back of the unit. "TIME SYNC" flashes on the display.
2. Once sync is completed,"TIME UPDATED" appears on the display followed by 2 beeps indicating time sync is complete.
The updated time will appear on the display.
3. If sync was not successful, "SYNC FAILED" will appear on the display and a long beep will sound. If this happens, please
try again, with a different iPhone or iPod if needed. If sync still fails, please see Setting Clock Manually below to set the
clock.
NOTE: iPhone time is automatically updated to the correct time via cell phone towers. The time on your iPod is accurate only
to the time on the computer the last time the iPod was synced to it. It's possible to have up to 59 seconds difference between
the unit and synced iPhone/iPod.
Setting Time Zone, Daylight Saving Time, Clock and Calendar Manually
If you want to set the clock manually instead of using the Time Sync feature please proceed as follows:
1. This unit ships with the DST Switch set to "AUTO" and will automatically adjust for daylight savings time in that position.
To set DST manually, set to "+1" to advance the time 1 hour. Slide to " – 1" to turn the clock back 1 hour.
2. The default clock setting is Eastern Time. If you live in the Eastern Time zone no further adjustments are necessary. If you
live in a different time zone press and hold the Time Zone Button on the back cabinet until the unit beeps and "EASTERN"
appears in the clock display, then press and release the  or  Buttons until your own time zone appears in the display.
Press and release the Time Zone Button to exit the Time Zone setting mode. The unit beeps twice and the display shows
the time in your time zone.
3. Press and hold the Time Set Button on the back cabinet until the time display begins flashing, then press and release the
 or  Buttons to adjust the time display. Hold the  or  Buttons for rapid adjustment, then release the buttons and
press repeatedly to set the display to the exact minute. Observe the AM and PM indicators to make sure you have set the
time correctly.
4. Press and release the Time Set Button again. The Year flashes in the display. Press and release the  or  Buttons to
set the correct year if necessary.
5. Press and release the Time Set Button again. The Month and Date flashes in the display. Press and release the  or 
Buttons to set the correct month and date if necessary.
6. Press and release the Time Set Button once more to exit the setting mode. The unit beeps twice to confirm that the time
and calendar settings are complete.
Room Volume
1. Slide the Volume Level Switch located on the back of the unit to High for large rooms or to Low for smaller rooms.

Setting Up the Unit

4
P7
: