Note: Do not close the connector flips before connecting the cables. When connecting the cables, ensure
that the connectors are attached firmly.
1060 Wireless-WAN card
Before you replace the wireless-WAN card, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 50.
2. Remove the SIM card, SD card, and Base Module. See "Removing the SIM card, SD card, and Base
Module" on page 50.
3. Remove the back cover assembly. See "1020 Back cover assembly" on page 53.
4. Disconnect the cable of the built-in battery.
.
Chapter 7
Removing or replacing a FRU
61