Removal steps of the speaker assembly
When installing: Ensure that the connectors are attached firmly.
Step
Screw (quantity)
3
M2 × L4 mm, flat-head, nylon-coated (2)
1120 Mini DisplayPort bracket
Before you replace the mini DisplayPort bracket, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 50.
2. Remove the SIM card, SD card, and Base Module. See "Removing the SIM card, SD card, and Base
Module" on page 50.
3. Remove the back cover assembly. See "1020 Back cover assembly" on page 53.
4. Disconnect the cable of the built-in battery.
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
69