Removal steps of the digitizer cable
Note: Do not close the connector flips before inserting the cable.
When installing: Ensure that the connectors are attached firmly.
1070 Docking-support card
For access, remove this FRU:
•
"1010 Back cover assembly and smart card reader" on page 44
•
"1040 Touch-sensor cable" on page 53
•
"1050 Docking-support-card cable" on page 54
Removal steps of the docking-support card
Step
Screw (quantity)
1
M1.6 × 3.5 mm, flat-head, nylon-coated (3)
1080 Wireless WAN card
For access, remove these FRUs in order:
•
"1010 Back cover assembly and smart card reader" on page 44
1
3
1
1
2
1
Color
Torque
Silver
0.098 Nm
(1.00 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
55