1080 Touch Controller Card Cable - Lenovo ThinkPad X1 Hardware Maintenance Manual

1080 Touch controller card cable

Before you replace the touch controller card cable, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 50.
2. Remove the SIM card, SD card, and Base Module. See "Removing the SIM card, SD card, and Base
Module" on page 50.
3. Remove the back cover assembly. See "1020 Back cover assembly" on page 53.
4. Disconnect the cable of the built-in battery.
.
Chapter 7 Removing or replacing a FRU
65