Wireless Mac Filter - Zoom 4402 User Manual

Beacon Interval
Enable TX
Bursting?
Enable Packet
Aggregation?
Enable
Greenfield?
Enable WMM?
Enable WMM No-
Acknowledgemen
t?
Enable WMM
APSD?
Enable WMM
DLS?

Wireless Mac Filter

Use this page to specify the MAC addresses of clients who are
allowed to join the wireless network.
MAC Filter Mode: When you select Accept, the 802.11n
Wireless Router will compare the MAC address of a client
requesting access to the network with the Current Filter Table.
Clients not on the list will be denied access.
In Reject mode, 802.11n Wireless Router will reject clients with
MAC addresses that are in the list.
MAC Address: To add entries to this list, enter the complete
MAC address which contains 12 hexadecimal letters and click
Add.
MAC filter list: You can enter MAC addresses which you want
filtered out and click Delete.
After making changes to this page click Apply.
Length of time between broadcasts of the
beacon frame by the AP. The beacon frame
contains control information and can be used
by mobile stations to locate an AP. The default
is 100 milliseconds.
Select between Disable or Enable (default).
Select between Disable or Enable (default).
Select between Disable (default) or Enable.
Select between Disable (default) or Enable.
If WMM is enabled, you can select between
Disable or Enable for the following 3 fields:
Select between Disable or Enable.
Select between Disable or Enable.
Select between Disable or Enable.
31