Wds Settings - Zoom 4402 User Manual

pane, click on WPS. The WPS page opens. You will see the AP
PIN Code displayed on the page. Enter this number on your
wireless client's software page. The access point will now
establish a secure connection with the client.
Client PIN code: Log in to the Zoom Configuration screen
(following the instructions in Step 2). Click on Advanced on the
top menu. Then click the Wireless Settings tab. On the left side
pane, click on WPS. The WPS page opens. You will see a text
box next to Client PIN code. Enter the PIN code number from
your wireless client's software page here. Click Connect. The
access point will now establish a secure connection with the
client.

WDS Settings

A Wireless Distribution System (WDS) (also called a bridge)
expands the area covered by a wireless network by using
multiple Access Points connected wirelessly. All APs must use
the same channel.
Note: If you want to configure the 802.11n Wireless Router as a
Repeater, as pictured below, we recommend that you select
"Hybrid" (Repeater) mode and then add MAC address of Access
Points in the Remote Bridge List. To ensure the connection,
please set the same channel and security method between
different APs.
Parameter Select or enter . . .
AP Mode See the section below to choose between the
3 options for the WDS function.
Channel Choose Auto or a channel from 1-11 or 1-13
depending on your country.
Connect to APs in Select Yes or No.
list
Remote Bridge To add entries to this list, enter the complete
List MAC address which contains 12 hexadecimal
letters and click Add.
AP Mode: You have 3 options for the WDS function.
AP Only: Default setting. When this function is selected,
it means the router works like an AP only.
28 802.11n Wireless Router User Manual