Preventive Maintenance Program ( To Be Done By The Authorised Jolly-Mec Technical Assistance Centre ) - Jolly Mec Classe Installation, Use And Care Manual

CHAP.07 - USAGE AND MAINTENANCE FOR THE USER
07.8 PREVENTIVE MAINTENANCE PROGRAM (to be done by the authorised Jolly-Mec Technical Assistance Centre)
We wish to remind you that the Extraordinary
Maintenance to be carried out on this type of heating
stove must be done obligatorily every year by qualified
maintenance personnel, in order to maintain its function-
ality, efficiency and comfort.
For questions ,we invite you to contact the authorised Jolly-Mec Technical Assistance Centre, through your retailer.
• Cleaning stove main body (to be verified according to the usage)
• Cleaning of flue once a year to be verified according to the usage (attention to horizontal lines)
• Cleaning of fans once a year (to be verified according to the usage)
1. Clean inside the fireplace with the provided tools
2. Remove the steel grid (see F
IG
3. Extract the pellet basket and clean it(see F
4. Remove the hollow in sequence, starting with the upper part:
a) Push up the top hollow (see F
inside (see F . 4) for the release of his seat to leave the burning
IG
chamber.
b) Take the side hollow (either right to left) to top (see F
inward (see F . 6) to free it from its slot and leaning it backwards
IG
(see F . 7), remove from the burning chamber.
IG
Proceed similarly with the other hollow.
c) Take the front / central hollow at the top (see F
F . 9) and tilt backward to release the pellet pipe (see F
IG
remove from the burning chamber.
5. Clean with a brush the inner surfaces of the boiler (see F
6. Remove the lid of the chamber of smoke (see F
cific (can) or palette and brushes clean the ashes and residues.
7. Reassemble carefully following the sequence.
* Recommended cleaning once a month
(but check the manual).
F . 5
IG
F . 9
IG
WARNING!To carry out these operations, the electrical current
must be turned off; you must wait until the heating stove is cold
and comply rigorously with the safety regulations in force.
*
. 1).
. 2).
IG
. 3), lift and pull in front and turning down
IG
. 5), lift and turn
IG
. 8) pull forward, lift (see
IG
. 10), and
IG
. 11).
IG
. 12) and a vacuum spe-
IG
F . 6
IG
F . 10
IG
F . 1
IG
F . 3
IG
F . 7
IG
F . 11
IG
35
F . 2
IG
F . 4
IG
F . 8
IG
F . 12
IG