iQ Pet iQ Plus+Duo Owner's Manual page 48

3. With the handheld transmitter,
press the Nick and Constant buttons
simultaneously. The code setting has
been successfully done if the receiver/
collar vibrates when the pager button is
pressed on the handheld transmitter.
2-Dog code setting
1. Start with the receiver/collar
turned off and the Rheostat intensity
dial level on the handheld transmitter
set to "0". On the handheld transmitter,
slide the dog selector switch right to
align with "II".
2. Place the red dot on the back of the
handheld transmitter to the red dot on
the receiver/collar. Hold the two red
dots together for 5 seconds.
Release them when the green LED
blinks rapidly on the receiver/collar.
3. With the handheld transmitter,
press the Nick and Constant buttons
simultaneously. The code setting has
been successfully done if the receiver/
collar vibrates when the pager button is
pressed on the handheld transmitter.
47
8. CODE SETTING